Hard disk drive (HDD) personal computer is the most vulnerable device, since its design uses many mechanisms through which data is read. However, due to such advantages over integrated memory units as speed and the ability to format without losing clusters, HDDs are still used in PC architecture. During intensive work over many years, mechanical damage to the hard drive is often observed, which can lead to the loss of some information.

How to restore the HDD?

The main reason for the incorrect operation of the HDD is “broken” sectors, the reading of which is not possible. Often, PC owners, when their hard drive fails, try to “reanimate” them themselves, which can lead to even more dire consequences, and specialized information recovery services require fairly high payments for their services.

It should be noted that in some cases there is no talk of restoring the functionality of the HDD at all, because only the information contained on the hard drive is important. For these reasons, the only sure way to access lost data is specialized software.

In this article, we will look at the HDD Regenerator program, which is often used for professional purposes by many services. The main difference between HDD Regenerator and many similar programs is its low-level operating algorithm, which allows, through integration into the DOS environment, to gain access not only to the HDD itself, but also to monitor and restore sectors and disk memory cells, as well as participate in monitoring and control of hard drive mechanisms using hardware methods.

For these reasons, HDD Regenerator actually restores “broken” sectors, preserving the information that was stored in them, and does not demagnetize and remove them from the general array. Initially, we need to download and install HDD Regenerator on a PC. In order to describe in more detail the process of working of the program for hard drive recovery, we will look at the functionality of the software through the Windows interface.

So, after installing and launching HDD Regenerator, a dialog box appears in front of us.

HDD Regenerator works directly in OS Windows.

To check and restore the HDD in the system shell, click on the top line shown in the photo. A window will open for you to select the hard drive partitions that need to be restored.

Sometimes a warning appears that your HDD controller SATA works in mode ANCI. To fix this error, you need to reboot through the BIOS and set the operating mode to SATA IDE.

Remember! When using this program, you must disable all applications that access the hard drive during operation (antivirus software, search indexing, etc.).

It often happens that this cannot be done, as is clearly demonstrated by the dialog box that constantly appears during the verification process.

In order to avoid similar messages press the button " Cancel“, as a result of which the Command Line console appears in front of us, where four items are indicated.

1. Diagnostics and scanning of “broken” sectors and partitions.

2. Full HDD scan with/without data recovery.

3. Software version.

4. Information about the results of HDD Regenerator.

As an example, press the key 2 And Enter and monitor the progress of the hard drive check.

It is worth noting that HDD recovery using this method does not allow for complex hard drive repair, and is therefore very ineffective in some cases. How can I restore the operation of my computer's hard drive?

HDD recovery via bootable USB flash drive

To do this, you need flash memory with a capacity of at least 1 GB. When starting HDD Regenerator, click on the item “ Create a bootable USB flash drive“And wait until the data on it is formatted and the boot data is placed. After this, the program will offer to restart the PC, which is what we do.

During the process of rebooting the PC, you need to go into the BIOS and set the priority for loading OS Windows through the bootable flash card!

After this, a DOS window will appear in front of us, in which we will be asked to select partitions for analysis and recovery.

Select the required directory and click Enter. All. The process has started and now we can only wait for the results.

Remember that you can stop the scanning process by pressing the Esc key, however, in this case no one guarantees correct results, so you should wait until the full recovery process is completed.

If the HDD is significantly damaged, the program will “freeze” while processing a particular sector, and the duration of the program can be several hours. In this case, there is nothing left to do but purchase a new HDD and copy onto it some of the information that was recovered using HDD Regenerator.

The HDD regenerator program is a powerful tool for restoring disks and their sectors. If you have tried simpler programs and they did not produce any results, then it’s time to turn to HDD regenerator. The utility works entirely on English. Of course, on the developer’s website there is a file “regenerator HDD rus”, but it only Russifies the start menu, which you will rarely see. Try diagnosing and repairing bad sectors hard drive in this program.

Go to the developer’s official website at http://www.dposoft.net and download the program installation file. Click on the “Download” link, select the save directory. Next, proceed to the process of unpacking the regenerator HDD, all text in the window will be in English. Just click on the “Next” button.

Select the program installation directory. This is an important point, since you need to install the regenerator HDD on the disk that you are not going to check. Any open processes on the hard drive may interfere with diagnostics. Click the “Change” button and specify the desired folder.

Wait for the installation process to complete, it will take a few minutes.

As soon as the “Cencel” button at the bottom changes to “Finish”, the installation is complete.

When you first open the program, you may see a window that says the disk type is incorrect. You will be prompted to change the mode to IDE and restart your computer. If you are not ready to work with the BIOS, then click “no”.
In the main window of regenerator HDD you will see three main links.

“Bootable USB Flash” - creates a bootable memory card if you have only one hard drive on your computer and you have nowhere to install the program. Or, for personal convenience in carrying.
“Bootable CD/DVD” – bootable optical disk.
You need the top link, which begins with the words “Click here to repair...” at the moment, it will run diagnostics.

Select hard drive which needs to be restored. In this example there is only one.

The program interface will be exactly the same as you see in the screenshot below. You have three lines to choose from:

Prescan – diagnostics, after which you will see all the bad sectors.
Scan with/without repair – a scan during which you can immediately run diagnostics.
Assembly information.

Which item to choose depends on your goals and the condition of the hard drive. In order to see the full picture, it is better to choose Prescan.
Write the number 1 and press Enter.

All that remains is to indicate which sector to start diagnosing the device from. To execute the full one, write 0 and press Enter.
If you know exactly which sector you need, then write 3.

The diagnostic process will take a long time, you can start doing other things while the computer is busy. It is better not to touch it and not open programs.
In addition, it is prohibited to open programs on the hard drive being diagnosed.

Once the diagnostics are complete, you will see the number of bad sectors on the screen. To correct them, press the Esc key.
In the menu that appears, you need the fourth item to change the option. Press 4 and Enter.

Go to the second point to restore. Remember that the program does not respond to the mouse, you must manually enter the number and press the Enter key.

You will have the following options:

Scan and repair bad sectors.
Scan, but do not restore. You have already completed this step.
Regenerate all sectors in a certain interval. To do this, you need to know the interval of bad sectors; it is better not to select this item if you are not an experienced user.

To restore, press number 1.

The recovery process is quite long, you can approximately find out the speed from the percentage value below.

Please note that the program only recovers one bad sector. To completely restore your hard drive, you need to purchase a licensed version of the program on the developer’s website. As a trial period, you receive one recovery procedure to evaluate the performance of the regenerator HDD.

This utility is an indispensable assistant for many computer repair services, since it does not mask the problem, like other programs, but corrects it. Other programs simply disable the “bad” sector, so you lose some of your disk space.

Hello, today we will talk about how to use the HDD Regenerotor program, how it works and what it is all about. So, let's move on to the instructions...

The software product is intended for testing and repairing hard drives, restoring their operation if this does not happen entirely correctly. able to cope even in the most difficult cases. The probability of this is more than fifty percent.

How the program works with data recovery on a hard drive

Pulses in the form of high and low level signals are generated and methodically sent to the damaged surface of the hard drive area. As a result of these influences, a process of magnetization reversal of the disk occurs. This process assists in the restoration of sectors that become inoperative due to incorrect disk magnetization processes.

Correction of system errors on the hard drive occurs without affecting user information. As a result, the data on the disk will not be affected in any way and will not be damaged.

Download the program HDD Regenerator quite realistic in free version– distribution of the software product is completely free (can be easily found on the official website or on).

Instructions for working with the HDD Regenerator program

After the installation process of the program is completed, an icon with a logo will appear on the desktop HDD Regenerator. Double-clicking on the icon will launch the program.

A window appears on the computer monitor asking you to scan the hard drive and create a bootable USB flash drive or disk.

Let's move on to the restoration work: you need to click on the image with the " Regeneration" The button is located on the top panel of tabs, then in the list that drops down, click – “Run process for”.

The next window prompts you to select to begin restoring it. It can be visualized by such quantitative parameters as capacity and number of clusters.

Pressing the " Start"("Start Process") causes a window to appear with an information message about the use of disk space by software already running on the electronic device. To continue the recovery process, you must close all open software and processes.

When the window shown below appears, click on the “ Retry».

This will cause a window typical of DOS to appear on the monitor screen.

Carry out diagnostics of the hard drive and continue restoration work;
Perform diagnostic operations and display data upon completion;
Restore certain sectors of the hard drive;
Display statistics.

After a normal scan, the program will offer to correct the errors found, select item “1”.

In the next window, indicate which sector you want to start scanning the disk from; we recommend starting from “0”.

Being the most fragile element of a computer, the hard drive (HDD) stores all your information. But sometimes it turns out that “broken” sectors form on the hard drive. Therefore, every owner of a PC or laptop should know how to use Regenerator. It is this program (hard disk recovery software) that allows you to recover a damaged hard drive.

Using a special method of reversing the magnetization of an unreadable sector, HDD Regenerator is able to restore rather than hide “broken” sectors. This feature program operation and allows you to restore a damaged hard disk (program to restore the hard disk). To successfully work with the program, use a special boot disk/flash drive created after starting the program. How to work with HDD Regenerator is absolutely clear: the interface is intuitive.

Main features of HDD Regenerator

It has the ability to detect and fix bad sectors.
The program is able to ignore the file system by scanning the disk at the physical level, which allows it to scan any file system, also with unpartitioned and unformatted hard drives.
Has the ability to work “directly”, i.e. act directly from the OS (WinXP and older).
It has the ability to create bootable disks and flash drives.

It is better to use the program when booting the computer from a flash drive that was created after HDD installations Regenerator. However, it makes sense to try restoring the hard drive through the Windows interface.

HDD Regenerator - how to use

After downloading the archive with the Regenerator program, open it and run the file HDD.Regenerator.v2011.exe. When installation is completed on the desktop, a program shortcut will appear and the Internet page will open at the same time. You can close the page, but launch the shortcut. A program window will open.

To start scanning and recovering your hard drive directly in your operating system, you need to click the top button. will appear corresponding window disk selection.

Moving the cursor to the bottom of the window, select the disk and click “Start process”. The window that appears will contain information about a warning that the disk is now in use, and will suggest that in order for the program to work correctly, close all programs on the computer that are used in work hard disk.

Therefore, find programs that “run on the hard drive” (for example, antivirus, etc.) and disable them. After that, click "Repeat". If you receive a warning again, it means something was missed. For example, Windows 7's fast search indexing is capable of using the drive you intend to scan and repair. Be that as it may, even if you were unable to disable all programs or services using the hard drive, you can still continue to use the recovery tool by clicking “Cancel”.

In the command line console that opens, the following items are written:

Scanning and viewing bad sectors.
Scanning (followed by recovery / without recovery).
Viewing the version.
View scanning statistics.

Select the number you require on the keyboard and press Enter. If it is, for example, the number 2, then the scanning work will begin, and at the bottom of the window you can see the number of bad sectors ("broken" sectors) - designated "B", and the number of recovered sectors (recovered) - R.

Today it is difficult to imagine a society in which computer technology would not be in demand. Computing devices help us in work and in everyday life; they simply improve our lives. One of the priorities of such technology is the ability to store and accumulate information. We are, of course, talking about the hard drive, although some call it in a different form; it serves as the basis for most modern PCs.

The HDD device (hard drive) is a very complex system in its parameters, which allows you to attract especially close attention. Surely most ordinary people who, one way or another, have encountered a computer in their lives have seen a rectangular-shaped object called a hard drive. The data recorded on this device is similar in function to a conventional tape recorder.

What does it mean? The main principle of operation is based on the transformation of the magnetic field inside the hard drive case. As for the general content of the HDD device, or as people say, the “filling”, it is very complex and consists of various important components. But still, the main thing is quite obvious. It contains solid plates (disks), located on one special axis, coated with ferromagnetic material, and connected by a common rod - a spindle. It is on these same plates that recording is carried out. Based on it, an alternating electric current is created, which affects the read head, while it itself moves relative to the surface of the disk. As a result, exactly the same magnetic field is formed from its gap, affecting the working surface of the disk, and this, in turn, leads to the formation of domains (magnetic crystals).

The speed of data exchange directly depends on the rotation of the shaft (spindle) to which the same plates with files are attached. It fluctuates, starting from 5400 rpm - the beginning of the lower speed - and ending with 10000-15000. Information is usually stored on both sides of the platter. The device's memory cache, as a rule, has one general size - 8, 16, 32 and 64 megabytes, and the hard drive capacity today can reach several terabytes.

Hard drives are not only built-in, but also external. At the same time, they have the same functions and properties, except that they are more convenient in everyday life. For example, you can take them with you on the road, you just need to connect to the port Computer USB or laptop. But you must also remember that all hard drives, regardless of their configuration, require more thorough testing and must be treated with more care, otherwise their service life will be short-lived. At the same time, they are very sensitive to vibration, and this is one of the main negative features. Damage to the HDD device is fraught with various adverse consequences, including its complete failure.

HDD Regenerator Software

Over time, any hard drive may have problems processing information when it is directly recorded. This can go unnoticed, and sometimes it promises much more serious consequences. These, for example, are damage to sectors of the HDD device. This is some kind of failure in the file system structure. If their number is insignificant, then the hard drive will operate in normal mode, but if the number of bad blocks exceeds the initial state, then the hard drive simply fails. The reason may unexpectedly lie in the cluster (data storage unit) of the device.

Among the emerging factors in such circumstances may be: under-recording of blocks in the event of an untimely power outage; factory defect; mechanical damage; frequent use, etc. The worst thing is when important files suddenly end up on bad sectors, and then this really becomes a serious problem.

Many people ask the question: “What to do in such a situation?” You can, of course, not suffer and just buy a new hard drive, or use the traditional method - formatting. But don’t be sad ahead of time, because HDD device It is quite possible to test it using some program or utility from the Internet that will restore bad and unreadable sectors. There is one such thing and its name is HDD Regenerator . We settled on her participation precisely because she truly deserves special praise. Most users prefer this program, since it has brought more than one hundred hard drives into working condition among general PC users, and on various forums regarding the discussion of this software, mostly only positive reviews are heard.

The HDD Regenerator utility allows you to restore damaged sectors or clusters directly on the computer’s hard drive, although if there are too many of them, then no program will help in this case. Everything happens in three stages. First - diagnosing the hard drive, then - testing, and finally - updating to a normal operating state (if everything was completed successfully). The work process is based on scanning the disk using an algorithm for reversing the magnetization of bad sectors, while HDD Regenerator is able to work with absolutely any file systems PC. A restored disk, as a rule, does not incur any loss of important data. The program is suitable for everyone without exception operating systems Windows.

Now that we have become familiar with the surface software HDD Regenerator, you can consider a more detailed and at the same time important question - how to use it?

How to use HDD Regenerator

To begin with, you need to install such a program on your computer. It could be trial version, but there is also an option for a licensing agreement. As you yourself understand, it is paid, however, and it has much more functions. In the case of problematic hard drives, this can play a significant role. Once the program is installed, it must be launched. A window will appear in front of you, in which several functions will be presented at once, their main essence boils down to either a general scan of the hard drive (top item), or self-booting USB Flash, as well as CD/DVD (both items below on the sides). If you choose the first option, the following window opens, where you will need to select a disk (hard drive) from the corresponding list, and the number of total sectors for it is also presented there. When you have decided which one you will scan, you need to click “Start” (Start process).

By the way, if you are working with this utility and other background programs are open, a window will appear on the monitor screen warning you about closing them. It is best to click “Retry” in such a situation. After this happens and all unnecessary programs stop the work process, before your
a window with command line, its interface will be black, but this is not a reason to panic, this is how it should be.

It will contain 4 points, and these are:

Scanning + sector recovery.
Scanning without recovering sectors.
Recovering sectors in a specific area of the disk.
Show general statistics.

Most users, as you yourself probably understand, select the first item of the program, but if you have just started mastering the utility, it is better to first resort to scanning without recovery, this is the second menu item. In the square brackets that appear there you will need to enter the number “2”. In the process of specifying, you should also pay attention to the segment to be scanned; HDD Regenerator will perform everything else automatically and you will only have to look at the final statistics. Well, the second option concerns bootable USB Flash, CD/DVD, it is usually used when bad sectors fixed in OS Windows are damaged. In this case, the landing disk or flash drive will be completely formatted and boot data will appear on it. After that, reboot the computer, go into the BIOS and select the startup method - Flash USB or CD/DVD. Then everything happens according to the scenario with the first option, when a dialog box with four menu items also appears.

The HDD Regenerator program does everything in minutes, tests and fixes. It weighs quite a bit, less than 10 Mb. The interface is so simple that even a schoolchild can figure it out. In all respects there are only advantages.

Office equipment