The PIN code is a personal identification number. It is used not only in SIM cards, but also in credit cards. The PIN code is the password for accessing both the card and the mobile phone. To disable the PIN code, you need to enter the PUK code, which is located on the plastic card (holder) of the SIM card or additional documentation (box).

Accordingly, in order to unblock PIN1, you must enter PUK1, for PIN2 - PUK2. If the PUK code was entered incorrectly 10 times, then the SIM card is blocked forever. If you have lost the documents from the SIM card, you must contact the nearest branch of the mobile operator. Have your passport with you.

When unlocking, it is often enough to enter only a PIN code. The SIM card is blocked if the code is entered incorrectly three times.

In order to disable the pin code on Android, you need to go to "Settings", then "Security" or "Location and security", then "SIM card settings". Opposite the item "Pin-code" there will be a check mark. When removing it, you must enter the correct pin code. After that, the smartphone will turn on without a password.

Unlocking on Samsung smartphones is almost identical, but due to the use of proprietary shells, some items may differ. To unlock the pin code, you need to go to "Settings", then the "My Device" tab, then "Lock Screen", then "Lock Screen". Here you can set both a pin code and a pattern.

In order to disable the PIN code, you must enter it in the "PIN code" section.

On some Samsung smartphones, the pin code is located in the "Security" tab and is disabled in the same way.

To disable the pin code on an Android tablet, you need to go to "Settings", then "Security", then "SIM card" or "PIN code". You must uncheck the box next to the PIN code item and enter the password.

Another way

If you forget your password, you can do a "HardReset". For most Samsung models, you need to turn off the smartphone, hold down the power button and the Home button at the same time. After the company logo appears, you need to find the “Wipe Data Factory Reset” item, then “Delete All User”. Moving through the items is carried out with the volume buttons. Confirmation is carried out with the Power button.

After you need to select the item "Wipe Cache Partition" and confirm. After all the actions, select the "Reboot" item. The smartphone will reboot.

This option has a minus - all user data is deleted, as well as contacts that were in the phone's memory.

For other models without a "Home" button, a similar menu is entered by simultaneously pressing the power and "+" or "-" buttons. After the logo appears, the buttons must be released. This option is not suitable for iPhone.

And what to do if you forgot the pin code or the face control does not work. This article is just about how to remove Pin-code and FaceControl on Android.

A fairly common problem on Android smartphones and tablets is forgetting passwords, pin codes, a pattern or a non-working face control, for those who have this problem, this article is dedicated.

Before you start!

A huge request to those who will read this article is a list of what you need to do:

Do not panic! More panic less result;
Read carefully, not through the line;
Re-read and re-read again, and only then write in the comments;
Take the time and spend 30 minutes of your time studying the article;
If the article contains a link, then you must go to it and read it, even if you are very literate and know all this;
Do as indicated in the article, and not as you are used to.

After reading 99.99% there is a chance that you will unlock your Android device! Ready? Then let's go!

Theory about Pin codes on Android

What happens when you create an Android screen lock in the form of face control, pattern, pin code, password? At the time of creating a lock in the Android OS in the section /data /system/ key files are created and if you delete them, you will again get an unlocked smartphone or tablet!

Method 1 Remove Pincode and FaceControl on Android (ADB RUN)

For this method to work, you must remember whether you had USB debugging enabled if so, great if not, then this way is not for you!

In order to remove the pin code you will need to download and install last version of the site's proprietary program - Adb Run.

Android unlocked!

Method 2 Remove Pin Code and FaceControl on Android

(via recovery)

To reset pin or face control lock you have to do the following:

1. For Sony, HTC, Nexus smartphones, first of all, you will have to unlock the Bootloader, if you have not done it before (in many cases (50/50) after that, the settings will be reset and the device will be unlocked). Unlocking is done once per device.

Unlock Bootloader Sony
Unlock Bootloader HTC
Unlock Bootloader Nexus
Unlock Bootloader Huawei
Unlock Xiaomi Bootloader

2. After that, you will need to install custom Recovery, naturally before that you will need to search for your recovery on the Internet.

5. Reboot Android to normal mode and you will see that it is already unlocked!

Method 3 Remove Pincode and FaceControl on Android (Aroma File Manager)

Happy unlocking Android!

That's all! Read more articles and instructions in the section Articles and Android Hacks. Stay with the site Android +1, then it will be even more interesting!

If you suddenly forgot the pattern, PIN or password that locks your Android device, you may think that you have encountered a serious problem and cannot bypass the Android lock. These security methods are designed to be difficult to hack, but in many cases, it is possible to do so and gain access to a locked device.

There are several different ways to hack the lock screen of an Android smartphone or tablet, but unfortunately there is no one way that works for everyone. Therefore, we will present the 6 most effective methods, and we hope you will be able to access the device without data loss. Creative individuals can choose which method to use first. By the way, for them we recommend the latest version of Minecraft http://droidsplay.com/games/strategy/288-maynkraft-0121-mod-.html , available for download without registration.

Method 1: Using the Android Device Manager

For new Android phones and tablets, using a service called Android Device Manager is probably your best bet. Once you are logged into your Google account, you can use any device or computer to access https://www.google.com/android/devicemanager.

Surprisingly, you can unlock the device by clicking on the "Lock" button in the Device Manager, which gains access to manage the device. If the service is having trouble finding the device, press the browser page refresh button several times, and if your phone is associated with this account, the service should connect in 5 attempts.

After pressing the "Lock" button, you will be prompted to enter a new password, which will replace the pattern, PIN or password you have forgotten. Enter your new password twice to confirm your choice, and then click the "Lock" button.

It may take up to 5 minutes to change your password, but when it does, you will be able to enter a new password to unlock your device.

Method 2: Use Samsung's "Find My Mobile" Service

If you have a Samsung device, a service called Find My Mobile should be the first one you try to use. To get started, go to https://findmymobile.samsung.com/login.do from any web browser and then sign in to your Samsung account. If you have never created a Samsung account, unfortunately this method will not work. In addition, some providers, such as Sprint, block this service, which can be very useful if you lose your phone.

Once you've signed in to your Samsung account, click the "Lock My Screen" button in the left pane. Enter your new PIN in the first field, and then click the "Lock" button at the bottom of the screen. After a minute or two, your lock screen password should be changed to the PIN you just entered and you can use it to unlock your device.

Method 3: Using the "Forgot pattern?"

If your device is running Android 4.4 or lower, try using the "Forgot Pattern" feature. After 5 failed unlock attempts, you will see the message "Retry in 30 seconds." While this message is displayed, click on the "Forgot pattern?" at the bottom of the screen.

Here, select "Enter your Google account details" (depending on your device, you can go directly to this option), then enter your Gmail login and password. Google will either send you an email with your unlock pattern, or you can change it right there.

Method 4: Perform a Factory Reset

If you're more concerned with unlocking your phone than saving any of the data stored on it, a factory reset should work in just about every situation.

This process will vary depending on the type of device, but for most phones, it starts with a complete power off of the device. When the screen goes black, press and hold the volume and power buttons at the same time, this should bring up the Android bootloader menu. Here, press the Volume Down button twice to highlight the Recovery Mode option and then press the Power button to select it.

Then, while holding down the power button, press the volume up button once - your phone should enter recovery mode. Next, use the volume buttons to highlight the "Wipe data/factory reset" option and then press the power button to select it. When the process is complete, select "Reboot system now" and your phone will be unlocked.

Method 5: Using adb to delete the password file

The next option will only work if you have previously enabled USB debugging mode on your phone, and even then, it will only work if you have allowed the computer you are using to connect via adb. But if all these requirements are met, this is the perfect way to unlock your device.

Start by connecting your phone to your computer using a USB data cable, then open a command prompt window in the ADB installation directory. From here, type the following command and then press Enter.

adb shell rm /data/system/gesture.key

Next, restart your phone and the lock screen should be gone, allowing you to connect to your phone. After that, make sure you have the new pattern or pattern, PIN or password set before the next reboot.

Method 6: Boot in safe mode to bypass screen lock by third-party apps

If the lock screen you are trying to bypass is displayed by a third party application and not by a system security utility, booting into safe mode is the easiest way to bypass it.

For most phones, you can boot into safe mode by pressing and holding the power key right on the lock screen. In the menu that appears, long press on the “Power off” option. Select "OK" when asked if you want to boot into safe mode. When the process ends, all third-party lock screen applications will be temporarily disabled.

After that, simply remove or change the password of the third party lock screen app or remove it and then restart your phone to exit safe mode. The third-party app's lock screen should be gone.

What method are you using? Do you know any other hacks that can bypass the Android lock screen? Let us know in the comments below.

I inserted a new SIM card into Xiaomi Redmi Note 4X and encountered - after restarting the phone, the first thing the system requires is to enter the PIN code of the SIM card. The PIN code is standard, nothing tricky, 0000, but nevertheless, doing it every time and wasting time does not make sense.

We find how to disable the SIM card PIN code request using the example of MIUI 9.5 (in other versions, it may be a little different, but the idea is the same).

Go to phone settings (gear)

We scroll through the settings page and look for the “System and device” section, in this section there will be an “Advanced settings” item at the bottom, go to it.

In the "Advanced settings" section, look for the item - "Privacy".

In the "Privacy" section, we are looking for "SIM card lock" - this is exactly what we need. Here you will see a list of your SIM cards.

We find the SIM card we need (the pincode of which we want to remove or change) and go to its section.

If we want to completely remove the PIN code of the SIM card, then we press the switch, enter the correct pin, and by this we turn off the PIN code request.

Subsequent PIN code requests will be disabled.

I painted everything in detail step by step, since the settings menu is quite branchy and then it takes a long time to remember where I saw this necessary little thing

In this short note, you will learn how to disable password entry in Windows 10. If you do not want to enter a password every time you log into your operating system, then you need to disable it.

But, by standard means, as, for example, in Windows 7, it will not be possible to disable it. Simply because there is no such item in the standard setting.

Disabling this option is not desirable, although, of course, you decide. What do we have to do? Now I'll tell you.

Press the key combination "WIN + R". The Run utility window will open.
In this window, enter the following entry: "control userpasswords2" (without quotes).
The "User Accounts" window will open, in which you need to uncheck the box "Require username and password".
Once you have unchecked the box, click the "Apply" button.
The Automatic Login window opens. Here you need to enter your password twice, after which, click "OK".
In other windows, also click "OK".

Attention! If you didn’t succeed, that is, you turn on the computer, and they write to you that the password is not correct, and require you to enter a password or pin code. Then do the same as you already did, according to the instructions described above, just enter the password for your Microsoft account, the account that you entered when installing Windows 10. And everything will work.

That's all. Now, when you enter your operating system, you do not have to enter a password. You can watch the video below, in which I showed how to disable password entry in Windows 10.

If you want to bring back the password entry feature when logging into Windows 10, then just check the "Require username and password" box that you unchecked.

Video. How to remove the password when logging in Windows 10.

Comments powered by HyperComments

vsemu-nauchim.ru

We remove the password when entering Windows 10, or shorten it to a pin code

After installing Windows 10, over time, it becomes annoying to constantly enter a password at the entrance, because it is usually difficult for us, because. used for a Microsoft account. There are 2 options:

remove it altogether, or more precisely, the operating system will enter the password for you at the entrance and you will not have to do anything.
set a pin - this is a shortened version of the password, that is, you can either type your main long password, or you can use a memorable pin code, such as 1234, and it will not be related to your Microsoft account. You can only use it to sign in to your Windows 10 computer, but you won't be able to sign in to your Microsoft account by entering a pin code.

Let's look at both options.

Completely remove the password requirement at the entrance

You can watch the video if it makes more sense to you:

1. Press the keyboard shortcuts WIN + R.

2. A window will appear in which you need to enter netplwiz and press OK or the enter key.

3. Uncheck the box "Require username and password" and click "Apply".

Set a PIN code to enter, instead of a long password

If we do not want to completely remove the password in order to protect our computer from the prying eyes of your relatives, but simply make it simpler, then it is enough to set a pin code.

And so that the computer does not require a password or PIN code when exiting sleep mode, then select the "Never" value in the corresponding setting.

gidkomp.ru

spec-comp.com

How to Disable Password Requirement in Windows - Windows 10

Surely you have already thought more than once about how to turn off the password request in Windows, right? But, there wasn’t enough time to understand all this, or maybe the information simply presented on third-party Internet resources was not very clear, which means that you never got to that ... But still, the moment has come when it’s time start to comprehend something new, and if you decide to purchase a Windows license key, and then you encounter the problem that your Microsoft account constantly asks you to enter a password, then you need to do something about it and as soon as possible.

Of course, if you want to use a local account (as it was before), you won't have to enter any passwords, although here Microsoft tried to make sure that there were several variations of entering a password. But again, not all users like the fact that when you start a PC or laptop that is at home and no one except its immediate owner uses it, see a screen for entering a password or PIN. That's exactly why, I suggest that today you learn in more detail about how to turn off the password request in Windows:

1. You need to press Win + R (the "Run" tab will open). In the data entry field, you must enter "control userpasswords2" (without quotes). You can also enter the command "netplwiz" (without quotes) - this is an alternative command that allows you to perform the same actions as when entering the first command. Now you need to click on "OK":

2. A window called "User Accounts" opened in front of us. Here you need to uncheck the box next to the item “Require username and password”:

3. Click on the "OK" button. A small window will open in front of us, where it will be necessary to enter the password that is currently used on the computer 2 times in a row. After entering the password, click on the "OK" button:

4. It remains only to restart your computer or laptop and wait for the Windows system to load, which will surely please you with a perfect login without any passwords and PIN codes. Now you will not be tormented by the question of how to disable the password request in Windows, because the settings you have set will be in effect all the time (regardless of the number of system reboots and computer shutdowns).

gold-nm.ru

Windows 10: how to remove the login password

If you are a Windows 10 user and would like to remove the password, which is required every time you turn on or restart your computer, then this article will show you how to disable it and log in automatically, opening the desktop immediately, skipping the operating system login screen.

Using a password is justified if you are not the only PC user (at work), or at home, when access to the computer needs to be closed, for example, from children. In the event that you are the only user, or you simply do not need password protection for your computer, then you can easily disable the password and configure the Windows operating system to automatically boot the desktop.

As a rule, we are only required to enter a password or PIN if we are signed in and working on Windows 10 with a Microsoft account.

When using a local account, the use of a password is not a prerequisite.

By the way, many users sync Windows 10 with a Microsoft account just to be able to download and install apps from the Windows Store, but this can be done using a local account as well (read: How to install a Windows 10 app with a local account).

So, if you use a local account, then password protection for logging in is up to you, and for those who work with the “ten” under a Microsoft account, authorization with a password is strictly required, but there is an easy way to bypass the password requirements when logging in.

Audio